3DZ Aerobat
3D Electric Fun Flyer
Quick-building small field hoverer

Span:
Length:
Weight:
Wing Area:
Wing Loading:
Construction:
Motor:
Prop:
Battery:
Radio:

26"
22"
<6 oz.
200 sq.in.
<4.3 oz/sq.ft.
1/8" sheet foam & EPS foam wing
GWS IPS DX-A,DX-C,IPSD-A
APC 9x3.8,GWS 11x7HD, GWS 10x4.7
3S1P 340mAh Lipoly
GWS Pico R/E/A/T system


The 3DZ is a quick-building fun-flying 3D aerobatic model designed to make you look good in the air!
Construction is based on a hot-wire cut EPS foam wing and sheet foam fuselage and control surfaces.
All parts are pre-cut for easy assembly.
Basic assembly should take no more than an hour or two using foam-safe cyano.

Kit Contents

Fully illustrated instruction manual
Pre-cut foam fuselage, tail, and ailerons
Hotwire-cut foam wings
Carbon elevator bearing system and fuselage stiffeners
IPS motor mount
Control horns
Pushrod wire

Illustrated Instruction Manual

Download the manual (470Kb)
It's in Adobe pdf format.

Download the FREE Adobe Acrobat reader




Movies

Click here to download Microsoft's (free) Media Player 9 software
if you have trouble viewing these movies.

A typical flight with the DX-A motor and APC 9x3.8 prop(10Mb)


Links

Ezone discussion thread



Sorry, no longer in production.


 

Not in a frame? Click here to go to the main web site.